Follow

FSLM Verification Platform Process Guide – For Verifying Body and Verifier

1. Scope

        1) This guidance is for the verifying body (VB) owner/admin and verifier to complete the SLCP verification flow procedures on Higg.org platform.

        2) In this guidance, the facility role for the testing procedures has been mentioned also. Please refer to the separated guidance of SLCP Verification Guidance on Higg.org Platform for Facility in details.      

2. Process Guide for Verifying Body (VB)

       1) Verifying body assigns the verifier for the verification to a facility on SLCP Gateway

       a. Login to your verifying body account on SLCP Gateway (https://gateway.slconvergence.org).

       b. Go to “Assessments” and click “Select primary verifier” for the right  

Screen_Shot_2019-05-14_at_12.00.07_PM.png

     c. Select the verifier who will conduct the assessment and click “Save”.

Screen_Shot_2019-05-14_at_12.03.55_PM.png

Screen_Shot_2019-05-14_at_12.04.17_PM.png

    d. Wait up to 15 minutes. The assigned verifier will show on the facility’s FSLM.

SLCP Gateway Account Set Up Rules:

Facility, VB and verifier accounts must consist on the country and language setting. For example, if the facility is located in China and language is Mandarin, the VB and verifier accounts must set up the location in China and language is chosen Mandarin. If the VB and verifier accounts are set up the location as China and language as English, this VB and verifier can’t be shown in the VB selection dropdown list for facility to pick up in the facility’s account on higg.org.

2) Verifying body account owner/admin accepts the sharing request on higg.org platform (https://portal.higg.org)

    a. Verifying body account owner/admin can login your account on higg.org staging platform.

    b. Verifying body account owner/admin goes to FSLM section, click “Modules” and goes to “Pending Share Approval” tab to approve the sharing request from the factory that shares their FSLM for this verification.

Screen_Shot_2019-06-11_at_4.16.57_PM.png

3. Process Guide for Verifier

1) Assigned verifier accesses the facility’s verified FSLM.

    a. After login, the assigned verifier goes to “Shared with Me” and click “View” to get into the factory’s assessment.

Screen_Shot_2019-06-11_at_4.22.47_PM.png

 2) Start the verification

Verifier click “Begin verification” button in the verified FSLM and then the verified FSLM module status will become VRP (Verification in Progress) from ASC (Assessment Complete) in both verifier and facility’s account. Now the verifier can start the verification.

Note:

a. The completion rate in the vFSLM is the verification completion rate not facility assessment verification rate. So before the verifier starts the verification, the completion rate is 0. When the verifier completes the verification for each question, the completion rate will be increased to 100%. 

b. If the verifier doesn't click "Begin Verification", the vFSLM can't be edited. 

Screen_Shot_2019-06-11_at_4.23.14_PM.png

Screen_Shot_2019-06-12_at_9.41.25_AM.png

3) Conduct the verification (online and offline verification) 

- You can conduct the verification in the vFSLM on Higg.org platform (Online verification) 

    a. Verifier will select “Accurate/Inaccurate/Non-response/Accurate - Add Notes” in the dropdown list for each question of each section except "Facility Profile" section in the FSLM. In "Facility Profile" section, the verification selection will be "Accurate/Updated during the verification/No-response/Accurate - Add Notes" because in this section, facility information must be corrected.

Facility Profile section: 

Screen_Shot_2019-06-12_at_9.44.35_AM.png

Other sections:

Screen_Shot_2019-06-12_at_9.44.35_AM.png

If you choose "Accurate - Add Notes" selection, you must provide notes for that question. 

Screen_Shot_2019-06-12_at_9.44.54_AM.png

   b. Verifier must input verification data and correct the response at the left side if the original response is incorrect and you verify as “inaccurate”. Otherwise, you can't submit verification.

 If this question is verified as inaccurate, please make sure that you select "inaccurate" verification selection and then correct the response and provide verification data. After correcting the response, DO NOT change "inaccurate" back to "accurate". 

Screen_Shot_2019-06-12_at_5.40.07_PM.png

c. Verifier must input response and verification data if the original response is verified as “no response”. Otherwise, you can’t submit verification.

Screen_Shot_2019-06-12_at_9.45.18_AM.png

d. There is a filter tab shown on the top of the assessment page. Verifier can click “Additional Filters” by Accurate, Inaccurate, No response, Flag, Missing notes and Required sections. Verifier also can have inclusive filters. For example, click both Flag and Required filters.

  • Accurate: see all questions that verifier has marked as accurate
  • Inaccurate: see all questions that verifier has marked as inaccurate
  • No response: see all questions that verifier has marked as no response
  • Complete: see all questions that verifier has verified completely 
  • Flag: see all questions that have been flag by verifier
  • Required: see all questions that verifier is required to verify
  • Missing notes: see all questions that verifiers forget to provide the verification comments for "inaccurate" and "no response" questions. 

Screen_Shot_2019-06-12_at_3.09.12_PM.png

e. After finishing verifying one section, verifier can click “Next” to go to the next section or click “Previous” to go back to the last section.

Screen_Shot_2019-06-12_at_6.05.55_PM.png

- You can conduct the verification offline (use the offline excel file tool) 

a.  You can download the excel file offline tool on your FSLM module sharing page. 

Screen_Shot_2019-06-12_at_3.07.07_PM.png

b. Complete the verification for all questions in this offline excel file. The rule is the same as online verification (please refer to the rules above). 

Screen_Shot_2019-06-12_at_10.18.19_PM.png

c. After completing the offline verification in the excel file, you can import this excel file to the online vFSLM on Higg.org platform. If the completion rate doesn't achieve 100% after uploading the file, it means that you didn't fully complete the verification in this offline tool. You can click "Missing Notes" filter on the top or click "Submit Verification" button to find out the incomplete questions. 

Screen_Shot_2019-06-12_at_3.07.34_PM.pngScreen_Shot_2019-06-12_at_3.08.41_PM.png

 

4) Submit verification

a. You must complete all questions verification and make sure that the verification completion rate is 100%. 

b. Once completes the verification, verifier can click “Submit Verification” button at the left side bar. You must complete the verification for all questions except the follow-up questions in “Management System” since those follow-up questions are optional for facility to answer.

If you don’t complete any questions verification, when you click “Submit Verification”, it will show all incomplete questions IDs and the incomplete parts and you need to complete them. You must complete those questions so you can submit verification. 

Screen_Shot_2019-06-12_at_6.08.30_PM.png

c. If any questions verified as "inaccurate or no response" are missing verification notes, you can't submit verification. So you can click "Missing Notes" filter under "Additional Filters" tab in the vFSLM and find out the questions without verification notes. 

Screen_Shot_2019-06-12_at_6.26.55_PM.png

5) After submitting verification

a. The vFSLM status will become VRC (Verification Complete) in both verifier and facility’s account. The verifier can go to "Modules" and "Shared with me" to check the vFSLM status. 

Screen_Shot_2019-06-12_at_6.58.32_PM.png

Options for verifier when the vFSLM status is VRC:

  • Remove access
  • Download the excel file data
  • Download the CSV file data
  • Edit the vFSLM 
  • View the Verification Summary: Any inaccurate questions or questions flagged by the verifier will show in this summary 

Screen_Shot_2019-06-12_at_10.58.43_PM.png

     b. If the facility finalizes the verified FSLM, the verifier can see the verified FSLM status will become VRF in their account. The verifier can't edit the vFSLM when the vFSLM status is VRF. The verifier can't finalize and post facility's vFSLM. 

     c. If the facility disputes the verified FSLM, the verifier can see the verified FSLM status will become VRD in their account.

 

 

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.